dmesg - R7 250X AMDGPU

Return To R7 250X AMDGPU System Information

Linux version 4.11.2-1-default (geeko@buildhost) (gcc version 6.3.1 20170202 [gcc-6-branch revision 245119] (SUSE Linux) ) #1 SMP PREEMPT Sat May 20 18:13:12 UTC 2017 (03903d8)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.11.2-1-default root=/dev/mapper/system-root resume=/dev/system/swap iommu=pt showopts modprobe.blacklist=radeon
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000cd559fff] usable
BIOS-e820: [mem 0x00000000cd55a000-0x00000000cd589fff] reserved
BIOS-e820: [mem 0x00000000cd58a000-0x00000000cd868fff] usable
BIOS-e820: [mem 0x00000000cd869000-0x00000000cd986fff] ACPI NVS
BIOS-e820: [mem 0x00000000cd987000-0x00000000cea28fff] reserved
BIOS-e820: [mem 0x00000000cea29000-0x00000000cea29fff] usable
BIOS-e820: [mem 0x00000000cea2a000-0x00000000cec2ffff] ACPI NVS
BIOS-e820: [mem 0x00000000cec30000-0x00000000cf037fff] usable
BIOS-e820: [mem 0x00000000cf038000-0x00000000cf7b8fff] reserved
BIOS-e820: [mem 0x00000000cf7b9000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000042effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x8c3ae018-0x8c3be057] usable ==> usable
e820: update [mem 0x8c3a1018-0x8c3ad057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x000000008c3a1017] usable
reserve setup_data: [mem 0x000000008c3a1018-0x000000008c3ad057] usable
reserve setup_data: [mem 0x000000008c3ad058-0x000000008c3ae017] usable
reserve setup_data: [mem 0x000000008c3ae018-0x000000008c3be057] usable
reserve setup_data: [mem 0x000000008c3be058-0x00000000cd559fff] usable
reserve setup_data: [mem 0x00000000cd55a000-0x00000000cd589fff] reserved
reserve setup_data: [mem 0x00000000cd58a000-0x00000000cd868fff] usable
reserve setup_data: [mem 0x00000000cd869000-0x00000000cd986fff] ACPI NVS
reserve setup_data: [mem 0x00000000cd987000-0x00000000cea28fff] reserved
reserve setup_data: [mem 0x00000000cea29000-0x00000000cea29fff] usable
reserve setup_data: [mem 0x00000000cea2a000-0x00000000cec2ffff] ACPI NVS
reserve setup_data: [mem 0x00000000cec30000-0x00000000cf037fff] usable
reserve setup_data: [mem 0x00000000cf038000-0x00000000cf7b8fff] reserved
reserve setup_data: [mem 0x00000000cf7b9000-0x00000000cf7fffff] usable
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100001000-0x000000042effffff] usable
efi: EFI v2.31 by American Megatrends
efi:  ESRT=0xce9dcc98  ACPI=0xcd977000  ACPI 2.0=0xcd977000  SMBIOS=0xf04c0  MPS=0xfd530 
SMBIOS 2.8 present.
DMI: MSI MS-7693/970 GAMING (MS-7693), BIOS V22.4 12/21/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CF800000 mask FFFFFF800000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000042f000000 aka 17136M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff93e6000fd890]
esrt: Reserving ESRT space from 0x00000000ce9dcc98 to 0x00000000ce9dccd0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff93e600098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x3fc269000, 0x3fc269fff] PGTABLE
BRK [0x3fc26a000, 0x3fc26afff] PGTABLE
BRK [0x3fc26b000, 0x3fc26bfff] PGTABLE
BRK [0x3fc26c000, 0x3fc26cfff] PGTABLE
BRK [0x3fc26d000, 0x3fc26dfff] PGTABLE
BRK [0x3fc26e000, 0x3fc26efff] PGTABLE
BRK [0x3fc26f000, 0x3fc26ffff] PGTABLE
BRK [0x3fc270000, 0x3fc270fff] PGTABLE
BRK [0x3fc271000, 0x3fc271fff] PGTABLE
BRK [0x3fc272000, 0x3fc272fff] PGTABLE
BRK [0x3fc273000, 0x3fc273fff] PGTABLE
BRK [0x3fc274000, 0x3fc274fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x3dc3d000-0x3e9d2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CD977000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CD977070 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000CD97D768 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170119/tbfadt-658)
ACPI: DSDT 0x00000000CD977170 0065F3 (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x00000000CD980080 000040
ACPI: APIC 0x00000000CD97D878 00008E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000CD97D908 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000CD97D950 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000CD97D990 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x00000000CD97D9C8 001158 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: IVRS 0x00000000CD97EB20 0000C8 (v01 AMD    RD890S   00202031 AMD  00000000)
ACPI: BGRT 0x00000000CD97EBE8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
NODE_DATA(0) allocated [mem 0x42efe8000-0x42effdfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000042effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x00000000cd559fff]
  node   0: [mem 0x00000000cd58a000-0x00000000cd868fff]
  node   0: [mem 0x00000000cea29000-0x00000000cea29fff]
  node   0: [mem 0x00000000cec30000-0x00000000cf037fff]
  node   0: [mem 0x00000000cf7b9000-0x00000000cf7fffff]
  node   0: [mem 0x0000000100001000-0x000000042effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff]
On node 0 totalpages: 4181031
  DMA zone: 64 pages used for memmap
  DMA zone: 24 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 13107 pages used for memmap
  DMA32 zone: 838793 pages, LIFO batch:31
  Normal zone: 52160 pages used for memmap
  Normal zone: 3338239 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8c3a1000-0x8c3a1fff]
PM: Registered nosave memory: [mem 0x8c3ad000-0x8c3adfff]
PM: Registered nosave memory: [mem 0x8c3ae000-0x8c3aefff]
PM: Registered nosave memory: [mem 0x8c3be000-0x8c3befff]
PM: Registered nosave memory: [mem 0xcd55a000-0xcd589fff]
PM: Registered nosave memory: [mem 0xcd869000-0xcd986fff]
PM: Registered nosave memory: [mem 0xcd987000-0xcea28fff]
PM: Registered nosave memory: [mem 0xcea2a000-0xcec2ffff]
PM: Registered nosave memory: [mem 0xcf038000-0xcf7b8fff]
PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
percpu: Embedded 38 pages/cpu @ffff93ea2ec00000 s117464 r8192 d29992 u262144
pcpu-alloc: s117464 r8192 d29992 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4115676
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.11.2-1-default root=/dev/mapper/system-root resume=/dev/system/swap iommu=pt showopts modprobe.blacklist=radeon
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 163840 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 248092(94%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
Memory: 5170380K/16724124K available (7453K kernel code, 1306K rwdata, 5244K rodata, 1828K init, 1340K bss, 580956K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:33024 nr_irqs:1016 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3500.349 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.69 BogoMIPS (lpj=14001396)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K
ftrace: allocating 29354 entries in 115 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4 #5
smp: Brought up 1 node, 6 CPUs
smpboot: Total of 6 processors activated (42001.33 BogoMIPS)
sched_clock: Marking stable (692000000, 0)->(873833533, -181833533)
node 0 initialised, 2743195 pages in 72ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcd869000-0xcd986fff] (1171456 bytes)
PM: Registering ACPI NVS region [mem 0xcea2a000-0xcec2ffff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time:  8:58:27, date: 05/29/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfea0b000-0xfea0b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfea0a000-0xfea0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfea09000-0xfea090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfea08000-0xfea08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfea07000-0xfea070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfea00000-0xfea03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfea06000-0xfea06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfea05000-0xfea05fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfea04000-0xfea040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfe900000-0xfe93ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe800000-0xfe800fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:03:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe700000-0xfe700fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:04:06.0: [1106:3044] type 00 class 0x0c0010
pci 0000:04:06.0: reg 0x10: [mem 0xfe600000-0xfe6007ff]
pci 0000:04:06.0: reg 0x14: [io  0xd000-0xd07f]
pci 0000:04:06.0: supports D2
pci 0000:04:06.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:14.4:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
pci 0000:05:00.0: [1969:e091] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe53ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io  0xc000-0xc07f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:15.0:   bridge window [mem 0xfe500000-0xfe5fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x8c3a1018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8c3ae018-0x8fffffff]
e820: reserve RAM buffer [mem 0xcd55a000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd869000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcea2a000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf038000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0a00-0x0a0f] has been reserved
system 00:01: [io  0x0a10-0x0a1f] has been reserved
system 00:01: [io  0x0485-0x0494] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io  0x040b] has been reserved
system 00:06: [io  0x04d6] has been reserved
system 00:06: [io  0x0c00-0x0c01] has been reserved
system 00:06: [io  0x0c14] has been reserved
system 00:06: [io  0x0c50-0x0c51] has been reserved
system 00:06: [io  0x0c52] has been reserved
system 00:06: [io  0x0c6c] has been reserved
system 00:06: [io  0x0c6f] has been reserved
system 00:06: [io  0x0cd0-0x0cd1] has been reserved
system 00:06: [io  0x0cd2-0x0cd3] has been reserved
system 00:06: [io  0x0cd4-0x0cd5] has been reserved
system 00:06: [io  0x0cd6-0x0cd7] has been reserved
system 00:06: [io  0x0cd8-0x0cdf] has been reserved
system 00:06: [io  0x0800-0x089f] has been reserved
system 00:06: [io  0x0b20-0x0b3f] has been reserved
system 00:06: [io  0x0900-0x090f] has been reserved
system 00:06: [io  0x0910-0x091f] has been reserved
system 00:06: [io  0xfe00-0xfefe] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:06: [mem 0xff800000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfeb00000-0xfeb03fff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec01000-0xfec010ff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:14.4:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:15.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:04: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:04: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:04: resource 10 [mem 0xd0000000-0xffffffff window]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:05:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 13912K
iommu: Adding device 0000:00:00.0 to group 0
iommu: Using direct mapping for device 0000:00:00.0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Using direct mapping for device 0000:00:02.0
iommu: Adding device 0000:00:04.0 to group 2
iommu: Using direct mapping for device 0000:00:04.0
iommu: Adding device 0000:00:06.0 to group 3
iommu: Using direct mapping for device 0000:00:06.0
iommu: Adding device 0000:00:11.0 to group 4
iommu: Using direct mapping for device 0000:00:11.0
iommu: Adding device 0000:00:12.0 to group 5
iommu: Using direct mapping for device 0000:00:12.0
iommu: Adding device 0000:00:12.2 to group 5
iommu: Adding device 0000:00:13.0 to group 6
iommu: Using direct mapping for device 0000:00:13.0
iommu: Adding device 0000:00:13.2 to group 6
iommu: Adding device 0000:00:14.0 to group 7
iommu: Using direct mapping for device 0000:00:14.0
iommu: Adding device 0000:00:14.2 to group 8
iommu: Using direct mapping for device 0000:00:14.2
iommu: Adding device 0000:00:14.3 to group 9
iommu: Using direct mapping for device 0000:00:14.3
iommu: Adding device 0000:00:14.4 to group 10
iommu: Using direct mapping for device 0000:00:14.4
iommu: Adding device 0000:00:14.5 to group 11
iommu: Using direct mapping for device 0000:00:14.5
iommu: Adding device 0000:00:15.0 to group 12
iommu: Using direct mapping for device 0000:00:15.0
iommu: Adding device 0000:00:16.0 to group 13
iommu: Using direct mapping for device 0000:00:16.0
iommu: Adding device 0000:00:16.2 to group 13
iommu: Adding device 0000:01:00.0 to group 14
iommu: Using direct mapping for device 0000:01:00.0
iommu: Adding device 0000:01:00.1 to group 14
iommu: Adding device 0000:02:00.0 to group 15
iommu: Using direct mapping for device 0000:02:00.0
iommu: Adding device 0000:03:00.0 to group 16
iommu: Using direct mapping for device 0000:03:00.0
iommu: Adding device 0000:04:06.0 to group 10
iommu: Adding device 0000:05:00.0 to group 12
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb845c000-0xbc45c000] (64MB) mapped at [ffff93e6b845c000-ffff93e6bc45bfff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1496048308.228:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=37 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfea0b000 port 0xfea0b380 irq 19
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
Segment Routing with IPv6
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 1:463:979
rtc_cmos 00:03: setting system clock to 2017-05-29 08:58:29 UTC (1496048309)
PM: Checking hibernation image partition /dev/system/swap
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-9: WDC WD20EZRZ-00Z5HB0, 80.00A80, max UDMA/133
ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATAPI: SONY    DVD RW AD-7260S, 1.61, max UDMA/100
ata6.00: configured for UDMA/133
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM            SONY     DVD RW AD-7260S  1.61 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access     ATA      WDC WD20EZRZ-00Z 0A80 PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 5:0:0:0: [sda] 4096-byte physical blocks
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 5:0:0:0: [sda] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1828K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 724K
Freeing unused kernel memory: 900K
systemd[1]: RTC configured in localtime, applying delta of 330 minutes to system time.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Slices.
scsi 4:0:0:0: Attached scsi generic sg0 type 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
sr 4:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.2-1-default xhci-hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.2-1-default xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.11.2-1-default xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.11.2-1-default xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfea09000
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.11.2-1-default ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfea07000
firewire_ohci 0000:04:06.0: enabling device (0080 -> 0083)
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.11.2-1-default ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfea04000
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x174B:0xA002 0x00).
[drm] register mmio base: 0xFE900000
[drm] register mmio size: 262144
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 4.11.2-1-default ehci_hcd
usb usb7: SerialNumber: 0000:00:16.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
[drm] BIOS signature incorrect 0 0
ATOM BIOS: 113
[drm] GPU post is not needed
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
amdgpu 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
amdgpu 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits GDDR5
ohci-pci 0000:00:12.0: irq 18, io mem 0xfea0a000
[TTM] Zone  kernel: Available graphics memory: 8188242 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 2048M of GTT memory ready.
[drm] GART: num cpu pages 524288, num gpu pages 524288
amdgpu 0000:01:00.0: PCIE GART of 2048M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
[drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[drm] Internal thermal controller with fan control
[drm] amdgpu: dpm initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm]   DP-1
[drm]   HPD2
[drm]   DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   HDMI-A-1
[drm]   HPD3
[drm]   DDC: 0x195c 0x195c 0x195d 0x195d 0x195e 0x195e 0x195f 0x195f
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm]   DVI-D-1
[drm]   HPD1
[drm]   DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[drm]   Encoders:
[drm]     DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm]   DVI-I-1
[drm]   HPD4
[drm]   DDC: 0x1958 0x1958 0x1959 0x1959 0x195a 0x195a 0x195b 0x195b
[drm]   Encoders:
[drm]     DFP4: INTERNAL_UNIPHY
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000010, cpu addr 0xffff93ea1900e010
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000020, cpu addr 0xffff93ea1900e020
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000030, cpu addr 0xffff93ea1900e030
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000040, cpu addr 0xffff93ea1900e040
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000050, cpu addr 0xffff93ea1900e050
[drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0
[drm] PCIE gen 2 link speeds already enabled
firewire_ohci 0000:04:06.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
tsc: Refined TSC clocksource calibration: 3500.128 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3273ca08655, max_idle_ns: 440795323139 ns
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.11.2-1-default ohci_hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:13.0: irq 18, io mem 0xfea08000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.11.2-1-default ohci_hcd
usb usb9: SerialNumber: 0000:00:13.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:14.5: irq 18, io mem 0xfea06000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 4.11.2-1-default ohci_hcd
usb usb10: SerialNumber: 0000:00:14.5
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:16.0: irq 18, io mem 0xfea05000
[drm] ring test on 0 succeeded in 8 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 4 usecs
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI PCI host controller
usb usb11: Manufacturer: Linux 4.11.2-1-default ohci_hcd
usb usb11: SerialNumber: 0000:00:16.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
[drm] fb mappable at 0xD0443000
[drm] vram apper at 0xD0000000
[drm] size 5787648
[drm] fb depth is 24
[drm]    pitch is 6400
fbcon: amdgpudrmfb (fb0) is primary device
usb 1-1: New USB device found, idVendor=2109, idProduct=3431
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
usb 3-1: New USB device found, idVendor=2109, idProduct=3431
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 3-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
hub 3-1:1.0: 4 ports detected
Console: switching to colour frame buffer device 200x56
usb 8-1: new low-speed USB device number 2 using ohci-pci
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
usb 9-1: new full-speed USB device number 2 using ohci-pci
firewire_core 0000:04:06.0: created device fw0: GUID 0011060000003e06, S400
usb 8-1: New USB device found, idVendor=1c4f, idProduct=0024
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB Keyboard
usb 8-1: Manufacturer: SIGMACHIP
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/0003:1C4F:0024.0001/input/input0
usb 9-1: New USB device found, idVendor=12c9, idProduct=1025
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1: Product: 2.4G Wireless Set
usb 9-1: Manufacturer: Newmen Tech.,LTD
input: Newmen Tech.,LTD 2.4G Wireless Set as /devices/pci0000:00/0000:00:13.0/usb9/9-1/9-1:1.0/0003:12C9:1025.0003/input/input1
hid-generic 0003:1C4F:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-1/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.1/0003:1C4F:0024.0002/input/input2
hid-generic 0003:12C9:1025.0003: input,hidraw1: USB HID v1.10 Keyboard [Newmen Tech.,LTD 2.4G Wireless Set] on usb-0000:00:13.0-1/input0
input: Newmen Tech.,LTD 2.4G Wireless Set as /devices/pci0000:00/0000:00:13.0/usb9/9-1/9-1:1.1/0003:12C9:1025.0004/input/input3
hid-generic 0003:1C4F:0024.0002: input,hidraw2: USB HID v1.11 Device [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-1/input1
[drm] Initialized amdgpu 3.10.0 20150101 for 0000:01:00.0 on minor 0
random: crng init done
hid-generic 0003:12C9:1025.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Newmen Tech.,LTD 2.4G Wireless Set] on usb-0000:00:13.0-1/input1
clocksource: Switched to clocksource tsc
PM: Starting manual resume from disk
PM: Hibernation image partition 254:0 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-1): Mounting V5 Filesystem
usb 8-3: new full-speed USB device number 3 using ohci-pci
XFS (dm-1): Ending clean mount
usb 8-3: New USB device found, idVendor=03f0, idProduct=7604
usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-3: Product: Deskjet 3900
usb 8-3: Manufacturer: HP
usb 8-3: SerialNumber: CN592150X5048H
systemd-journald[193]: Received SIGTERM from PID 1 (systemd).
systemd: 19 output lines suppressed due to ratelimiting
systemd[1]: RTC configured in localtime, applying delta of 330 minutes to system time.
systemd-journald[611]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1496028520.467:2): apparmor="STATUS" operation="profile_load" name="ping" pid=664 comm="apparmor_parser"
audit: type=1400 audit(1496028520.843:3): apparmor="STATUS" operation="profile_load" name="klogd" pid=690 comm="apparmor_parser"
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
input: PC Speaker as /devices/platform/pcspkr/input/input6
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
sp5100_tco: I/O address 0x0cd6 already in use
audit: type=1400 audit(1496028521.487:4): apparmor="STATUS" operation="profile_load" name="syslog-ng" pid=847 comm="apparmor_parser"
acpi_cpufreq: overriding BIOS provided _PSD data
audit: type=1400 audit(1496028521.607:5): apparmor="STATUS" operation="profile_load" name="syslogd" pid=1018 comm="apparmor_parser"
alx 0000:05:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [4c:cc:6a:44:fe:c3]
audit: type=1400 audit(1496028521.699:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=1024 comm="apparmor_parser"
audit: type=1400 audit(1496028521.791:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=1031 comm="apparmor_parser"
audit: type=1400 audit(1496028521.791:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=1031 comm="apparmor_parser"
audit: type=1400 audit(1496028521.791:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=1031 comm="apparmor_parser"
audit: type=1400 audit(1496028521.791:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=1031 comm="apparmor_parser"
audit: type=1400 audit(1496028521.851:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=1043 comm="apparmor_parser"
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Adding 4190204k swap on /dev/mapper/system-swap.  Priority:-1 extents:1 across:4190204k FS
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kauditd_printk_skb: 11 callbacks suppressed
audit: type=1400 audit(1496028525.631:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/managesieve" pid=1204 comm="apparmor_parser"
audit: type=1400 audit(1496028525.739:24): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/managesieve-login" pid=1211 comm="apparmor_parser"
audit: type=1400 audit(1496028525.815:25): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3" pid=1218 comm="apparmor_parser"
audit: type=1400 audit(1496028525.947:26): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3-login" pid=1232 comm="apparmor_parser"
audit: type=1400 audit(1496028525.979:27): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/ssl-params" pid=1251 comm="apparmor_parser"
audit: type=1400 audit(1496028526.763:28): apparmor="STATUS" operation="profile_load" name="virt-aa-helper" pid=1264 comm="apparmor_parser"
audit: type=1400 audit(1496028526.891:29): apparmor="STATUS" operation="profile_load" name="/usr/sbin/apache2" pid=1274 comm="apparmor_parser"
audit: type=1400 audit(1496028526.891:30): apparmor="STATUS" operation="profile_load" name="/usr/sbin/apache2//DEFAULT_URI" pid=1274 comm="apparmor_parser"
audit: type=1400 audit(1496028526.891:31): apparmor="STATUS" operation="profile_load" name="/usr/sbin/apache2//HANDLING_UNTRUSTED_INPUT" pid=1274 comm="apparmor_parser"
audit: type=1400 audit(1496028526.891:32): apparmor="STATUS" operation="profile_load" name="/usr/sbin/apache2//phpsysinfo" pid=1274 comm="apparmor_parser"
XFS (dm-4): Mounting V5 Filesystem
XFS (dm-4): Ending clean mount
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
No iBFT detected.
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered disabled state
device eth0 entered promiscuous mode
alx 0000:05:00.0 eth0: NIC Up: 100 Mbps Full
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered forwarding state
NET: Registered protocol family 17
Netfilter messages via NETLINK v0.30.
usblp 8-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
usbcore: registered new interface driver usblp
Bridge firewalling registered
usblp0: removed
usblp 8-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
SFW2-IN-ILL-TARGET IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:4ecc:6aff:fe44:fec3 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=81 TC=0 HOPLIMIT=255 FLOWLBL=1038876 PROTO=UDP SPT=5353 DPT=5353 LEN=41 
SFW2-IN-ILL-TARGET IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:4ecc:6aff:fe44:fec3 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=136 TC=0 HOPLIMIT=255 FLOWLBL=1038876 PROTO=UDP SPT=5353 DPT=5353 LEN=96 
SFW2-IN-ILL-TARGET IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:4ecc:6aff:fe44:fec3 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=136 TC=0 HOPLIMIT=255 FLOWLBL=1038876 PROTO=UDP SPT=5353 DPT=5353 LEN=96 
SFW2-IN-ILL-TARGET IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:4ecc:6aff:fe44:fec3 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=136 TC=0 HOPLIMIT=255 FLOWLBL=1038876 PROTO=UDP SPT=5353 DPT=5353 LEN=96 
SFW2-IN-ILL-TARGET IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:4ecc:6aff:fe44:fec3 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=209 TC=0 HOPLIMIT=255 FLOWLBL=1038876 PROTO=UDP SPT=5353 DPT=5353 LEN=169 
Ebtables v2.0 registered
SFW2-INext-ACC-TCP IN=br0 OUT= PHYSIN=eth0 MAC=4c:cc:6a:44:fe:c3:7c:d3:0a:0a:97:8b:08:00 SRC=192.168.4.100 DST=192.168.4.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=47008 DF PROTO=TCP SPT=34124 DPT=1716 WINDOW=29200 RES=0x00 SYN URGP=0 OPT (020405B40402080A00FA1F400000000001030306) 
SFW2-INext-ACC-TCP IN=br0 OUT= PHYSIN=eth0 MAC=4c:cc:6a:44:fe:c3:7c:d3:0a:0a:97:8b:08:00 SRC=192.168.4.100 DST=192.168.4.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=29935 DF PROTO=TCP SPT=33508 DPT=1716 WINDOW=29200 RES=0x00 SYN URGP=0 OPT (020405B40402080A00FA2A010000000001030306) 
show_signal_msg: 10 callbacks suppressed
vulkaninfo[3462]: segfault at 1f486 ip 000000000001f486 sp 00007ffe11d30158 error 14 in vulkaninfo[400000+9000]
fuse init (API version 7.26)
vulkaninfo[3671]: segfault at 1f486 ip 000000000001f486 sp 00007ffcb11f8678 error 14 in vulkaninfo[400000+9000]

Return To R7 250X AMDGPU System Information